1.檢查開齒盤是否清潔,機器各部件是否運轉自如。

1. Check whether the toothed disc is clean and whether all components of the machine operate smoothly.

　　2.檢查托輥是否與型材底部形狀吻合。

2. Check if the roller matches the shape of the bottom of the profile.

　　3.手送型材進入機器,調整開齒盤至型材齒槽中間,按工藝要求壓入適當深度。

3. Hand feed the profile into the machine, adjust the toothed disc to the middle of the profile groove, and press it into the appropriate depth according to the process requirements.

　　4.調整各導向輪,確保型材運動方向與齒盤接觸點運動方向一致。

4. Adjust each guide wheel to ensure that the direction of profile movement is consistent with the direction of tooth contact point movement.

　　5.注意電氣開關是否指向OFF。

5. Pay attention to whether the electrical switch points to OFF.

　　6.調整后,可先試一段型材,用隔熱條檢查是否合適。

After adjustment, you can first try a section of the profile and check if it is suitable with an insulation strip.

　　7.按下啟動按鈕正式開機工作。

7. Press the start button to officially start up and work.

以上就是有關：AB面雙頭開齒機 的介紹，想了解更多的內容請點擊：http://m.8188gg.com 我們將會全心全意為您提供滿分服務，歡迎您的來電！

The above is an introduction to the AB face double head gear opening machine. To learn more, please click: http://m.8188gg.com We will wholeheartedly provide you with full score service. Welcome to call us!